Alternative to Using a Second Guide Rail Square
The TPG parallel guide system was designed to utilize a GRS-16 or GRS-16 PE as the connection point to your guide rail. In doing so, the TPG system performs two functions at once: it not only squares your workpiece, but it also provides a parallel and repeatable cut. Before this adapter was introduced, TPG users intending to use both left- and right-hand t-tracks at once required two guide rail squares. Now, the TPG Adapter provides a more economical alternative to using a second guide rail square.
Note this adapter will only ensure your cuts are parallel—not square! If you desire both square and parallel cuts in a single operation—a key benefit of the TPG system—we still recommend using at least one GRS-16 or GRS-16 PE guide rail square with the TPG system.
The TPG Adapter is compatible with either left- or right-hand t-tracks, and connects using the M6 comfort grip knobs and centering washers provided. It will not interfere with track saw plunge cuts, and can easily be moved along the guide rail or removed by loosening the M5 screws with the included ball-hex driver. The TPG Adapter secures to your guide rail using the same innovative keystone alignment feature and torpedo nut found on our GRC-12 Guide Rail Connectors, ensuring rock-solid attachment that's easy to install and remove.
What's in the Box
- 1 Qty. TPG Adapter Assembly
- 2 Qty. M6 Comfort Grip Knobs & Centering Spacers
- 1 Qty. 3mm Ball-Hex Driver